TP-Link TD-W8960N - Manual (Page 68)

TD-W8960N Wireless N ADSL2+ Modem Router User Guide
)
Note:
This feature is available only when OPEN, WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK
mode is configured.
)
Note:
1) To build a successful connection by WSC, you should also do the corresponding configuration
of the new device for WSC function meanwhile.
2) WSC (Wireless Security Corporation) is one kind of WPS (Wi-Fi Protected Setup) method.
I. By PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods. Click Push-Button,
you will see the screen as shown below.
Figure 4-69
Method One: Hardware push button.
Step 1: Press the QSS button on the front panel of the Router.
Step 2: Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen of adapter appears. Click Finish to complete the
QSS configuration.
61