TP-Link TD-W8960N - Manual (Page 59)

TD-W8960N Wireless N ADSL2+ Modem Router User Guide
4.4.11 DSL
Choose “Advanced Setup”Æ“DSL”, you can see the DSL Settings screen, this screen allows you
to configure the DSL (shown in Figure 4-56).
Figure 4-56
You can select the modulation type, phone line pair and the capability of Bitswap or SRA. After
you set them up, click Save/Apply to save the configurations.
4.4.12 UPNP
Choose “Advanced Setup”Æ“Upnp”, you can Enable or Disable the UPnP (Universal Plug and
Play) protocol on the screen.
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join
a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer in
use. UPnP broadcasts are only allowed on the LAN.
52