TANDBERG MPS API Interface D13639 - Manual (Page 61)

TANDBERG MPS API
User Guide
59
•
GroupEntryId: <1..16> Reference to the Group Directory position
the entry is stored.
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the command was not
accepted by the system
•
Description Textual description of the cause code.
Example:
xcommand groupentryadd name:”The Team”
localentryid.1:17
localentryid.2:29
localentryid.3:56
*r Result (status=OK):
GroupEntryId: 15
*r/end
OK
GroupEntryDelete Command used to delete an entry in the locally stored Group Directory.
Parameters:
•
GroupEntryId(r): <1..16> Reference to the entry to delete.
OK Result parameters:
None
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the command was not
accepted by the system
•
Description Textual description of the cause code.
Example:
xcommand groupentrydelete groupentryid:15
*r Result (status=OK):
*r/end
OK
LayoutLock Command use to lock a call id (e.g. a participant) to a given window in the
CP layout. The numbering goes from left to right, starting with window
number one at the top row. Note: If ConferenceSelfview is set to Off it is
only possible to lock the call id to window number one.
Parameters:
•
Window(r): <1..16>
•
CallID(r): <1..176> Call.
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the command was not
accepted by the system
•
Description Textual description of the cause code.
LayoutUnLock Command use to unlock a locked call id (e.g. a participant) from a given
window in the CP layout. The numbering goes from left to right, starting
with window number one at the top row. Note: Both the window id and the
call id must be defined.
Parameters: