TANDBERG MPS API Interface D13639 - Manual (Page 58)

TANDBERG MPS API
User Guide
56
•
Cause: <1…> Cause code specifying why the call was not accepted
by the system
•
Description Textual description of the cause code.
DialLocalEntry Command used to dial a number from the locally stored directory.
Parameters:
•
Conference(r): <1..35>
•
LocalEntryId(r): <1..99> Reference to the directory entry to be
dialed.
OK Result parameters:
•
CallRef: <1..96> Reference to the call. To be used as reference
when monitoring the call.
•
LogTag: <1…> Unique reference to call. Identifies the call in the call
log.
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the call was not accepted
by the system
•
Description Textual description of the cause code.
Example:
xcommand diallocalentry localentryid:15
*r Result (status=OK):
CallRef: 1
LogTag: 312
*r/end
OK
DisconnectCall Command used to disconnect a call.
Parameters:
•
Call(r): <1..176> Reference to the call to be disconnected.
OK Result parameters:
None
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the command was not
accepted by the system
•
Description Textual description of the cause code.
Example:
xcommand disconnectcall call:9
*r Result (status=OK):
*r/end
OK
DisconnectGWCall Command used to disconnect a gateway call.
Parameters:
•
GatewayCall(r): <1..80> Reference to the call to be disconnected.
OK Result parameters:
None
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the command was not