TANDBERG MPS API Interface D13639 - Manual (Page 36)

TANDBERG MPS API
User Guide
34
xpreferences detaillevel <1..2>
Most information elements accessible by the status-type root commands are defined to be
level1 information. However there are some information elements which are defined to be level2
information. When reading status information, only the information elements with a detail level
equal to or less than the detaillevel defined for the interface will be listed.
Example 2.24
xstat call 1 channels 1 audio
*s Call 1 (status=Synced, type=Vtlph, protocol=H323,
direction=Outgoing):
Channels 1 (type=Incoming):
Audio (status=Active):
Protocol: G722
Rate: 64
*s/end
OK
xpreferences detaillevel 2
OK
xstat call 1 channels 1 audio
*s Call 1 (status=Synced, type=Vtlph, protocol=H323,
direction=Outgoing, logTag=3):
Channels 1 (type=Incoming):
Audio (status=Active):
Protocol: G722
Rate: 64
RemoteIPAddress: ""
LocalIPAddress: "10.47.8.28:2326"
Encryption (status=On):
Type: AES-128
RSVP: Off
RSVPRate: 0
DynamicRate: 64
TotalPackets: 1618
PacketLoss: 0
Jitter: 0
*s/end
OK
xpreferences xmlconfigfeedback
If xmlconfigfeedback is set to on, feedback on configurations will be returned in XML-format
instead of the standard XACLI configuration format.
Example 2.25
XACLI-format:
*c xConfiguration SerialPort 1 BaudRate: 2400
XML-format: