TANDBERG MPS API Interface D13639 - Manual (Page 57)

TANDBERG MPS API
User Guide
55
OK
DialGroupEntry Command used to dial an entry from the Group Directory. Dialing from the
Group Directory makes it possible to set up a MultiSite conference in one
operation.
Parameters:
•
Conference(r): <1..35>
•
GroupEntryId(r): <1..16> Reference to the directory entry to be
dialed.
OK Result parameters:
The system will return the following elements for each call initiated.
•
CallRef: <1..96> Reference to the call. To be used as reference
when monitoring the call.
•
LogTag: <1…> Unique reference to call. Identifies the call in the call
log.
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the call was not accepted
by the system
•
Description Textual description of the cause code.
Example:
xcommand dialgroupentry conference:1 groupentryid:19
*r Result (status=OK):
CallRef: 2
LogTag: 313
CallRef: 1
LogTag: 312
CallRef:
*r/end
OK
DialInNumberAdd Command used to add a dial in number.
Parameters:
•
Conference(r): <1..15>
•
NetProfile(r): <2..7>
•
Number(r):
•
CallerId:
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the call was not accepted
by the system
•
Description Textual description of the cause code.
DialInNumberRemove Command used to remove a dial in number.
Parameters:
•
Conference(r): <1..15>
•
NetProfile(r): <2..7>
•
Number(r):
•
CallerId:
ERROR Result parameters: