Teledyne 4220 - Manual (Page 185)

4220 Flow Meter
Appendix E Material Safety Data Sheets
E-3
*Optional Indicating Silica Gel
Page 2
Section 5 - Health Hazard Data
PRIMARY ROUTES Inhalation Ingestion
OF ENTRY Skin Absorption Not Hazardous
CARCINOGEN NTP OSHA
LISTED IN IARC Monograph Not Listed
HEALTH HAZARDS Acute May cause eye, skin and mucous membrane irritation.
Chronic Prolonged inhalation may cause lung damage.
Signs and Symptoms
of Exposure Drying and irritation.
Medical Conditions
Generally Aggravated by Exposure Asthma.
EMERGENCY FIRST AID PROCEDURES - Seek medical assistance for further treatment, observation and support if necessary.
Eye Contact
Flush with water for at least 15 minutes.
Skin
Contact Wash affected area with soap and water.
Inhalation Remove affected person to fresh air.
Ingestion Drink at least 2 glasses of water.
Section 6 - Control and Protective Measures
Respiratory Protection
(Specify Type) Use NIOSH approved dust mask or respirator.
Protective
Gloves Light cotton gloves. Eye Protection Safety glasses.
VENTILATION Local Exhaust Mechanical (General) Special
TO BE USED
Other (Specify)
Other Protective
Clothing and Equipment None.
Hygienic Work
Practices Avoid raising dust. Avoid contact with skin, eyes and clothing.
Section 7 - Precautions for Safe Handling and Use/Leak Procedures
Steps to be Taken if Material
Is
Spilled Or Released Sweep or vacuum up and place the spilled material in a waste disposal container. Avoid raising dust.
Waste Disposal
Methods Dispose in an approved landfill according to federal, state and local regulations.
Precautions to be
Taken
In Handling and
Storage Cover promptly to avoid blowing dust. Wash after handling.
Other Precautions and/or Special
Hazards Keep in sealed containers away from moisture. The silica gel will readily adsorb moisture.