Turning on/off the tv monitor, Together with the communication terminal 22, Button on the supplied remote commander – Toshiba PCS-1 User Manual
Page 22
22
Preparing the System
PCS-1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\03OVR.FM
masterpage:Left
• If battery leakage occurs, clean the battery compartment and replace all the
batteries with new ones.
If you use a Sony TV, insert the IR repeater under the remote sensor of the TV.
Once you set the IR repeater, the TV will turn on or go to standby together with
the Communication Terminal when you press the
"
/
1
button on the supplied
Remote Commander.
If the TV monitor is not turned on by pressing the
@
/
1
button on the Remote
Commander, change the “IR Repeater Mode” setting in the General Setup menu.
For details on the “IR Repeater Mode” setting, see “General Setup Menu” on
page 44.
Turning On/Off the TV Monitor Together With the Communication
Terminal
Note
DC 19.5V
CAMERA UNIT
MIC
(PLUG IN POWER)
ISDN UNIT
WHITE
BOARD
DSB
IR OUT
100BASE-TX
10BASE-T
1
2
1
2
to IR OUT
IR repeater (supplied)
Remote sensor
TV monitor