Toshiba PCS-1 - Manual (Page 159)

PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\09OTH.FM masterpage:Left
159
Location and Function of Parts and Controls
Ap
pe
ndi
x
a STATUS indicator
Lights in orange when power is supplied
to the ISDN Unit. When initializing is
complete, blinks in green.
b STATUS 1-6 indicators
Lights in orange when link
synchronization of each ISDN connector
is established. Lights in yellow when
each ISDN line is connected.
c ISDN 1-6 terminals (8-pin modular
jack)
Connect to the ISDN lines using the
ISDN modular cable.
d TERMINAL connector
Connect to the ISDN UNIT connector
on the Communication Terminal with
the interface cable supplied with the
ISDN Unit.
a RGB A input select button and
indicator
Selects the video input from the video
equipment connected to the RGB IN A
connector.
b SEND button and indicator
Sends the selected input picture to the
Communication Terminal.
c RGB B input select button and
indicator
Selects the video input from the video
equipment connected to the RGB IN B
connector.
d RGB IN A connector (D-sub 15-pin)
Connects to the RGB output connector
on a computer, etc.
e RGB IN B connector (D-sub 15-pin)
Connect to the RGB output connector on
a computer, etc.
PCS-B768 ISDN Unit
(Optional)
1 2 3 4 5 6
1 2 3 4 5 6
STATUS
1
2
3
4
Front/Upper panel
Rear
PCS-DSB1 Data Solution Box
(Optional)
RGB IN B RGB IN A
RGB A
SEND
RGB SELECT RGB B
1 2 3
4 5
6 7 8 9 q;
AUX MIC 1 MIC 2 MIC 3 MIC 4 MIC 5 TERMINAL RGB OUT OUT LINE OUT IN
Front/Upper panel
Rear