Toshiba PCS-1 - Manual (Page 179)

PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\09OTH.FM masterpage:Left
179
Videoconferencing Room Layout
Ap
pe
ndi
x
Adjust room lighting so that it falls on the
participants. Avoid direct light on the TV
monitor. Light intensity on faces should be
about 300 lux or more.
If an inverter type or brightness-adjustable
type of fluorescent lamp is used, the
sensitivity of the Remote Commander may
deteriorate.
You can fix the Communication Terminal or
the Camera to your chosen place of
installation using the supplied Velcro.
1
Stick the supplied Velcro to the
bottom of the Communication
Terminal or Camera.
2
Stick another piece of Velcro to the
installation place.
3
Install the Communication Terminal
or the Camera on the installation place
by securing the two pieces of Velcro.
Installing the Communication
Terminal and Camera
3
3
3
3
Bottom of the Communication
Terminal
Bottom of the Camera Unit