Texas Instruments TLV1562 - Manual (Page 85)

Software Overview
79 Interfacing the TLV1562 Parallel ADC to the TMS320C54x DSP
.endif
.if SAVE_INTO_MEMORY
* test for table end, set pointer back if true
TC = (AR0 ==AR7) ; is AR0 = AR7? (table end reached?)
if (NTC) goto STORE_END ;
* set pointer back to table start
AR7 = #(data_loc_A) ; point to first date location of the storage table
.endif
STORE_END: RETURN ; jump back into data aquisition routine
**************************************************************
* IRQ_INT0:
* Interrupt routine of the external interrupt input pin INT0
**************************************************************
IRQ_INT0:
return_enable ; interrupt is not in use
**************************************************************************
* BXINT0:
* Interrupt routine of the serial transmit interrupt of the buffered SPI
**************************************************************************
BXINT0:
return_enable ; interrupt is not in use
.sect ”.text”
.copy ”calibrat.asm”
.end