Toshiba 52HMX95 - Manual (Page 92)

92
Chapter 8: Using the TV’s features
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 52/62HMX95
Adjusting the audio
(continued)
Using the SRS ™ WOW ™ surround sound
feature
WOW ™ is a special combination of SRS Labs audio
technologies (SRS 3D, FOCUS, and TruBass) that creates a
thrilling surround sound experience with deep, rich bass from
stereo sound sources. Your TV’s audio will sound fuller, richer,
and wider.
To adjust the WOW ™ settings:
1. Put the TV in STEREO mode (see “Selecting stereo/SAP
broadcasts” on page 90).
2. Press MENU and open the Audio menu.
3. Highlight Advanced Audio Settings and press ENTER.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
4. Press z or y to highlight the WOW feature you want to
adjust, and then press x or • to adjust the item.
Done
Advanced Audio Settings
WOW: SRS 3D
WOW: FOCUS
WOW: TruBass Low
Reset
Off
Off
Dolby Virtual
TruSurround
On
• WOW: SRS 3D — To turn the surround sound effect
On or Off.
Note: If the broadcast is monaural, the SRS 3D effect
will not work.
• WOW: Focus — To turn the vocal emphasis effect On
or Off.
• WOW: TruBass — To select the desired bass expansion
level (High, Low, or Off ).
5. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
_________
WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
*Manufactured under license from Dolby Laboratories. Dolby is a registered
trademark of Dolby Laboratories.
Using the virtual surround sound
feature (Dolby
® Virtual/TruSurround ™ )
The Dolby* Virtual/TruSurround feature allows you to enjoy
virtual surround sound from the TV’s speakers. This feature
is enabled only when the TV is receiving digital broadcasts.
To turn on the Dolby Virtual/TruSurround feature:
1. Press MENU and open the Audio menu.
2. Highlight Advanced Audio Settings and press ENTER.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
3. In the Dolby Virtual/TruSurround field, select On.
Done
Advanced Audio Settings
WOW: SRS 3D
WOW: FOCUS
WOW: TruBass Low
Reset
Off
Off
Dolby Virtual
TruSurround
On
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To turn off theDolby Virtual/TruSurround feature:
Select Off in step 3 above.
Note: The Dolby Virtual/TruSurround and WOW SRS 3D
features cannot be on at the same time. If you set one to
On, the other will automatically be set to Off.