beautypg.com

Led indications – Toshiba 52HMX95 User Manual

Page 125

background image

125

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

(E) 52/62HMX95

Chapter 12: Troubleshooting

LED indications

The green and red LED lights on the TV front touchpad (to the left of the POWER button) indicate the TV’s status, as described below:

• Red ON (solid) and Green OFF = The TV power cord is plugged in.
• Green ON (solid) and Red OFF = A recording is in progress while the TV is OFF.
• Red ON (solid) and Green ON (solid) = A recording is in progress while the TV is ON.
• Green and/or Red blinking (see table below).

Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the green LED will blink
while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.

MENU

VOLUME

CHANNEL

EXIT

TV/VIDEO

POWER

Red LED

Green LED

TV front touchpad

LED Indication

Condition

Solution

1) Green blinks continuously

at 3-second intervals.

Red blinks continuously

at 0.5-second intervals.

2) Green blinks continuously

at 0.5-second intervals;

Red is ON (solid).

3) Green and Red blink

continuously at
1-second intervals.

4) Green is OFF;

Red blinks at 0.2-second

intervals 4 times (repeats).

5) Green is OFF;

Red blinks continuously

at 0.5-second intervals.

6) Green is OFF;

Red blinks continuously

at 1-second intervals.

7) Green is OFF;

Red blinks at 0.2-second

intervals 3 times (repeats).

The lamp unit door is not seated
properly.

The lamp is not working properly.

The lamp is not working properly
after the eighth automatic restart
(see item #2).

An abnormal temperature
increase has occurred.

Abnormal operation
(including cooling fan stop).

Abnormal operation of BUS line.

The color wheel has stopped.

Turn OFF the TV and unplug the power cord. Review “Lamp unit
replacement and care” in Chapter 13 to ensure that the lamp door
is installed securely. If the problem persists, contact a Toshiba
Authorized Service Center.

The TV will automatically try to restart itself eight times (see
item #3).

Note: If the TV is powered off and then quickly on again when the lamp unit
is hot, it may take several minutes for the picture to appear on-screen. This is
a property of DLP TV lamp technology and is NOT a sign of malfunction. For
details, see “Setting the Quick Restart

®

feature” and “IMPORTANT NOTICE

ABOUT HOT LAMP RESTART” on page 56.

Turn the TV OFF and then ON again. If the problem persists, replace
the lamp unit (see Chapter 13). If the problem still persists, contact a
Toshiba Authorized Service Center.

Turn OFF the TV. Check to make sure all slots and openings in the
TV cabinet are not covered, blocked, or dusty. Turn ON the TV
again. If the problem persists, contact a Toshiba Authorized Service
Center.

Turn OFF the TV and unplug the power cord. Plug the power cord
in again and turn ON the TV. If the problem persists, contact a
Toshiba Authorized Service Center.

Turn OFF the TV and unplug the power cord. Plug the power cord
in again and turn ON the TV. If the problem persists, contact a
Toshiba Authorized Service Center.

Turn OFF the TV and unplug the power cord. Plug the power cord
in again and turn ON the TV. If the problem persists, contact a
Toshiba Authorized Service Center.

This manual is related to the following products: