Toshiba 52HMX95 - Manual (Page 23)

23
Chapter 2: Connecting your TV
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 52/62HMX95
Connecting an IR receiver/repeater or home theater control system
to the TheaterNet IN infrared terminal
For additional control options for your home theater system,
you can connect an IR receiver/repeater (not included) or a
home theater control system (not included) to the TV’s
TheaterNet IN infrared terminal.*
See the Specifications section in the back of this manual for
TheaterNet IN terminal requirements.
Contact your home theater electronics dealer for details about
IR receivers/repeaters and home theater control systems.
You will need:
one IR cable
___________
*
The TheaterNet IN function has been verified for use with SmarTouch™ STS/STS-C wireless RF control systems. Due to the wide
variation in remote control operation among manufacturers, these functions may or may not operate with other brands.
SmarTouch is a trademark of Crestron Electronics, Inc. (www.crestron.com).
For additional control options
for your home theater system,
set up the TheaterNet
on-screen device control
feature. You can use this
feature to control many IR
remote-controlled devices and
IEEE1394 devices using the
on-screen control icons.
See pages 50–54 for details on
setting up and using TheaterNet.
See pages 25–27 for details on
connecting IEEE1394 devices.
TheaterNet ™ on-screen device control
Note: The TheaterNet on-screen icons are the only device functions
available when the icons are on-screen. To access other device
functions, close the TheaterNet icon window.
MENU VOLUME CHANNEL EXIT TV/VIDEO POWER
ENTER
EXIT TOP MENU
Toshiba Video 3
To operate the TV with this
connection, point the Toshiba
TV remote control toward the
front of the IR receiver/
repeater or home theater
control system.
IN OUT
Back of IR receiver/repeater or home
theater control system* (not included)
TV back panel
MENU VOLUME CHANNEL EXIT TV/VIDEO POWER
IR receiver/repeater
or home theater
control system