Toshiba KV-HD01A - Manual (Page 49)

48
RJ-45 PIN configuration for Ethernet Physical specification for Ethernet
Browsing image over the network
The Network Viewer can perform the following functions.
View live image and still JPEG image.
Play back recorded images.
Save JPEG-image locally.
Change regular record, event record, and Timer properties
Please take instructions as follows to install the browsing software and operate it.
1. Install the browsing software to your PC
Insert the CD-R comes with the KV-HD01 and follow the onscreen instructions to install it. The browsing
software contains two programs, the Network Viewer and the Image Viewer.
NOTE: The settings of display area of a local PC must be set at least 800 x 600 and small font.
2. Open Network Viewer
Open the START menu, point to Program, TOSHIBA Network Viewer and click Network Viewer.
The dialog box appears as shown in Picture A. Select Network VIEWER SYSTEM to show the LOGIN
dialog box as shown in Picture B. Type IP of the KV-HD01 and password and click OK button. (The
password is same as the KV-HD01 set. If you don’t set a password for the KV-HD01, the default is
9999)
PIN NO. PIN Assignment
1. TX +
2. TX -
3. RX +
4. Not Connected
5. Not Connected
6. RX -
7. Not Connected
8. Not Connected
Wire Type Cat. 5
Connector Type RJ-45
Max. Cable Length 30 M
Hub Wiring Configuration Straight Through