Toshiba KV-HD01A - Manual (Page 29)

28
ALARM: Duplicating all the alarm-event recorded video from HD 1 and HD 2 to HD 3.
Stay on the DISK SETTING page.
Use the Up/Down buttons to highlight BACKUP; select ALARM, then press the ENTER / SAVE
ENTER/SAVE button to proceed.
SELECT: Duplicating a particular recorded video from HD1 and HD 2 to HD3.
Stay on the DISK SETTING page.
Use the Up/Down buttons to highlight BACKUP, select SELECT and then press the
ENTER / SAVE
ENTER/SAVE button to list all the recorded video.
Press the Up/Down buttons to select the desired clip and press the SETUP button to
mark it.
After completing the selection, press the ENTER / SAVE
ENTER/SAVE button to proceed.
NOTE: If the capacity of HD 3 is not sufficient to store all selected video, a warning message
“HD3 SPACE NOT ENOUGH” will be displayed on the screen. Please, insert a larger
capacity of hard disk drive or erase some data from the drive and start the process over
again.
MAIN MENU
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
GO TO DISK PAGE
DISK SETTING
REFORMAT
HD 3 USAGE
BACKUP----------------FULL
ALARM
SELECT
MAIN PAGE
BACKUP ALARM TO HD 3
MAIN MENU
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
DISK SETTING
REFORMAT
HD 3 USAGE
BACKUP----------------FULL
ALARM
SELECT
MAIN PAGE
BACKUP PART TO HD 3
A 2001-02-01 12:20
2001-02-01 03:30 +
A 2001-03-02 04:20 +
2001-04-01 13:30
TOTAL: 41 M
READY
TO GO
OK
CANCEL