Toshiba KV-HD01A - Manual (Page 37)

36
5.5 COMMUNICATION
The COMMUNICATION option is used to configure status of the communication port when the
connected with an external device.
RS232:
The RS232 option is used to determine the activation/ deactivation of the RS232 communication
port for externally triggered recording. To record video into the hard-disk drive connect the REC
exposure contact on the rear panel of the DVR to the switch used to activate the alarm.
MASTER: Sets the KV-HD01A as the master device.
SLAVE: Sets the KV-HD01A as the slave device.
NET ENABLE is used to allow remote users viewing privileges over a network or IP.
OFF: Ethernet capability is turned off
ON: Ethernet capability is turned on
NET SETTING is used to set the IP, MASK, and GATEWAY address of the KV-HD01A.
SET: Sets the IP,MASK, and GATEWAY addresses of the KV-HD01A
MAIN MENU
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
GO TO COMM PAGE COMM SETTING
RS232
: SLAVE
NET ENABLE : OFF
NET SETTING : SET
MAIN PAGE
SET RS232