Toshiba KV-HD01A User Manual

Page 22

4.2.3 Alarm Recording

Take the following steps to activate the programmed alarm recording. For ALM REC RATE, ALM REC

QUALITY, ALARM STATUS, ALM DURATION, and PRE-ALARM settings, please refer to section 5.4

for more details.

(1) Press the SETUP button

to enter the MAIN MENU.

(2) Select ALARM and press the

ENTER

SAVE

ENTER/SAVE button

to enter the ALARM SETTING.

(3) Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If pre-alarm

recording is required, set PRE-ALARM to ON.

(4) To activate the alarm recording, set ALARM OPERATION to ON. To deactivate it, set ALARM

OPERATION to OFF.

4.2.4 Externally triggered Recording

You can use an external switch to turn the recording function of the DVR on/off to record video into the

hard-disk drive by connecting the REC exposure contact on the rear panel of the DVR. Please refer to

section 2.3 for more details.

MAIN MENU

TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM

GO TO ALARM PAGE

ALARM SETTING

ALM OPERATION : OFF
REC RATE

: 60F/S

REC QUALITY

: HIGH

ALM TYPE

: NO

ALM DURATION

: NON STOP

PRE- ALARM

: OFF

MAIN PAGE
ALARM REC ENABLE