Quatech Device Server - Manual (Page 82)

Configuring the SDS using a Web interface Quatech SDS User’s Manual
Page 76 940-0183-154 October 2006
Figure 62 - Add/Del Users screen
Step Procedure Description
‰
Step 1 Enter the user name and password in the
boxes provided.
Passwords appear as asterisks.
‰
Step 2 Select the Add option.
‰
Step 3 Press the Submit key. A network confirmation prompt displays.
Figure 63 - Network confirmation prompt
Step Procedure Description
‰
Step 4 Enter the user name and password in the
boxes provided.
If desired, check the Remember my
password box.
Be sure to key in the name and password
in exactly as you did in the Add/Del
Users screen. Both are case-sensitive.
‰
Step 5 Click OK. You can now view the new user name
and password by selecting Show Users
from the Admin screen. Be sure to record
the user name and password in a safe
place.
Deleting users
Step Procedure Description
‰
Preliminary
Step
Click on Admin in the selection bar and
then select Add/Del User from the left
panel.
The Add/Del Users screen displays.