Quatech Device Server - Manual (Page 29)

Quatech SDS User’s Manual Installing the device drivers
October 2006 940-0183-154 Page 23
Figure 15 - Restart confirmation pop-up box
Step Procedure Description
Step 20 Press OK to restart the SDS and make
your changes active.
The SDS reboots and takes on the new
configuration. The Information pop-up
box displays.
Continue with □ Step 21.
Figure 16 - Information pop-up box
Step Procedure Description
Step 21 When the Status light glows green, press
OK.
The glowing Status light indicates that
the SDS is ready. The TCP/IP Network
Configuration Parameters screen displays.
Continue with □ Step 22.
Figure 16 shows the Restart
confirmation pop-up box.
Figure 17 warns you that the
SDS needs time to reset. Wait
until the Status LED glows
green, and then press OK.