Quatech Device Server - Manual (Page 40)

Installing the device drivers Quatech SDS User’s Manual
Page 34 940-0183-154 October 2006
Figure 29 - TCP/IP Network Configuration Parameters screen
Step Procedure Description
Step 38 If you are satisfied with the parameters,
press Next to continue.
If you are not satisfied, press Change
Properties to change the TCP/IP
properties.
The Rerun network connectivity test pop-
up box displays.
Continue with □ Step 39.
The Internet Protocol (TCP/IP)
Properties dialog box displays.
Go to □ Step 32.
Figure 30 - Rerun network connectivity test pop-up box
Step Procedure Description
Step 39 Press OK. The Network Connectivity Test screen
displays. Go to □ Step 14.
Figure 30 shows the TCP/IP
network configuration parameters
including the following:
¾ Address type
¾ IP Address
¾ Subnet mask
¾ Default gateway
Figure 31 shows the Rerun
network connectivity test pop-
up box.