Omnitron Systems Technology RS-232 - Manual (Page 32)

26
Read Two-Digit Addendum
If enabled, the reader will decode the two-digit secondary symbol when it is
scanned with the primary symbol, and add the data to the end of the transmis-
sion. If not, any two-digit secondary symbol will be ignored.
SELECTION CODE: G2
Read Two-Digit Addendum I
Do Not Read Two-Digit Addendum J
Read Five-Digit Addendum
This option operates in the same manner as the Read Two Digit Addendum
option except it enables the reading of a five digit secondary symbol.
SELECTION CODE: G2
Read Five-Digit Addendum K
Do Not Read Five-Digit Addendum L
Addendum Required
If a two or five-digit addendum is enabled, then enabling this option will
require an addendum be present before a good read is registered. If not, then
symbols with and without the addendum will be accepted.
SELECTION CODE: G2
Addendum Required M
Addendum Not Required N
Add Separator Space
This option is used with the Two and Five-Digit Addendum options. If en-
abled, an ASCII space character is inserted between the data decoded from
the primary UPC symbol and the addendum symbol.
SELECTION CODE: G2
Add Space Separator O
Not Add Space Separator P