Omnitron Systems Technology RS-232 - Manual (Page 31)

25
EAN Settings:
Enable/Disable EAN-13
EAN-13 is a fixed format symbology and there are no variations allowed. If
enabled, EAN-13 symbology will be read, subject to the reading restrictions
specified by this set of options. If disabled, the data from the symbology will
be disregarded.
SELECTION CODE: G2
EAN-13 Enable A
EAN-13 Disable B
Enable/Disable EAN-8
If enabled, EAN-8 symbology will be read, subject to the reading restrictions
specified by this set of options. If disabled, the data from the symbology will
be disregarded.
SELECTION CODE: G2
EAN-8 Enable C
EAN-8 Disable D
Send Induced Country Code Character
The EAN symbology adds an extra digit to the beginning of the data to create
a two-digit country code. If enabled, the added induced character is the first
character transmitted. If disabled, the induced character is not transmitted.
SELECTION CODE: G2
Induced Character Enable E
Induced Character Disable F
Send Check Digit
The check digit is mandatory in the EAN symbology. If enabled, the reader
will send the decoded check digit as the last character in the data stream trans-
mitted. If not, the check character will be suppressed before transmission.
SELECTION CODE: G2
Send Check Digit G
Do Not Send Check Digit H