Olympus C-4000 Zoom - Manual (Page 57)

56
Chapter 4
Shooting mode setting — Mode dial (Cont.)
HQ
2288x1712
Ⅵ Exposure differential
● The difference (ranging from –3.0 to +3.0)
between the exposure determined by the
currently selected aperture and shutter
speed compared to the exposure level
considered optimal by the camera appears
in the upper right-hand corner.
● When the exposure differential is set to less
than –3.0 or more than +3.0, the exposure
differential appears in red.
● When you press the
button, the
screen at right appears with the bar
indicating current exposure settings.
Pressing the shutter button halfway shows
how much the current exposure is different
from the correct exposure. (Only when the
button is set to AE LOCK.)
Aperture (F-number)
Shutter speed
Exposure differential
● To avoid camera movement, we
recommend use of a tripod for any effect
which uses a slow shutter speed.
Note
When the bar is displayed
When using My Mode, the shooting mode you selected with the menus in the
mode is activated. You can also save the shooting mode or function
settings you are currently using in the mode. If you set the mode dial to
again, the camera will activate these stored settings. In MY MODE
SETUP, you can create and save up to 4 different My Mode settings.
~
“MY
MODE SETUP” (P. 151)
Follow steps 1 through 3 in “A/S/M/ mode setting” (P. 48). In step 3
select , , or . 4 3 2 1
Mode dial
setting
Using My Mode
● Although the settings you are using can be saved, the zoom position you
are currently using will not be saved.
Note
HQ