Olympus C-4000 Zoom - Manual (Page 184)

183
Chapter 11
Troubleshooting (Cont.)
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
1 The flash is set to the
off mode.
2 The subject is lighted.
3 Sequential shooting is
on.
4 You are recording
movies.
5 Panorama shooting is
set.
6 FUNCTION is set to
BLACK/WHITE
BOARD.
1 Press to select a flash
mode other than .
2 Set the flash to Fill-In mode.
3 Set the drive mode to
(single-frame shooting).
4 Select a shooting mode
other than .
5 Cancel the Panorama mode.
6 Set FUNCTION to OFF.
P. 78
P. 75
P. 92
P. 47
P. 96
P. 100
The date recorded with the image data is wrong.
1 The date is not set.
2 The camera has been
left for too long with the
batteries removed and
the date/time setting
was canceled.
1 Set the date. The clock
adjustment is not factory-
preset.
2 Set the date again.
P. 27
P. 27
Your customized settings have been canceled.
1 You turned off the
power without saving
the settings.
1 Set ALL RESET to OFF. P. 143
The flash does not fire.