Oki C 130n User Manual
Page 96
96 - C130n User’s Guide
"
Always test any cleaning solution (such as mild detergent) on a small
inconspicuous area of your printer to check the solution’s performance.
"
Never use sharp or rough implements, such as wire or plastic cleaning
pads.
"
Always close the printer’s covers gently. Never subject the printer to
vibration.
"
Do not cover the printer immediately after using it. Turn it off and wait until
it cools down.
"
Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the imaging cartridge.
"
Do not open the printer during printing.
"
Do not tap media stacks on the printer.
"
Do not lubricate or disassemble the printer.
"
Do not tilt the printer.
"
Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the printer and cause the print quality to deteriorate.
"
Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
"
Keep the printer level to avoid toner spillage.