Oki C 130n - Manual (Page 141)

141 - C130n User’s Guide
Media is
misfeeding.
The media is not
correctly positioned in
the tray. Remove the misfed media and
reposition the media properly in the
tray.
The number of sheets
in the tray exceeds
the maximum
allowed. Remove the excess media and reload
the correct number of sheets in the
tray.
The media guides are
not correctly adjusted
to the media size. Adjust the media guides in the Tray 1
to match the size of the media.
Warped or wrinkled
media is loaded in the
tray. Remove the media, smooth it out, and
reload it. If it still misfeeds, do not use
that media.
The media is moist
from humidity. Remove the moist media and replace it
with new, dry media.
Custom-sized media,
labels, postcards,
thick stock, or
letterheads are
loaded in Tray 2. Special media must be loaded in
Tray 1 only.
The recommended
label sheet is facing
the wrong way in Tray
1. Load the label sheets according to the
manufacturer’s instructions.
Unsupported media
(wrong size,
thickness, type, etc.)
is being used. Use good quality recommended
media. See “Print Media” on page 53.
The media feed roller
is dirty. Clean the media feed roller.
For more details, refer to “Cleaning the
Media Feed Roller” on page 99.
Symptom Cause Solution