Oki C 130n - Manual (Page 37)

37 - C130n User’s Guide
INPUT
TRAY
(cont.) AUTO
CONTINUE Settings ON/OFF
If OFF is selected, an error occurs if the size of paper
being printed on is different from the size of paper
specified in the printer driver.
If ON is selected, no error occurs if the size of paper being
printed on is different from the size of paper specified in
the printer driver.
TRAY
CHAINING Settings YES /NO
If YES is selected and the specified paper tray runs out of
paper during printing, a paper tray loaded with paper of the
same size is automatically selected so printing can
continue.
If NO is selected and the specified paper tray runs out of
paper, printing stops.
MAP MODE Settings ON/OFF
Select whether or not the Tray Mapping
function is used.
LOGICAL
TRAY 0-9 Settings PHYSICAL TRAY 1/ PHYSICAL
TRAY 2
Specify whether jobs received from another
manufacturer’s printer driver are printed using
Tray 1 or Tray 2.
PHYSICAL TRAY 2 is the default only for
LOGICAL TRAY 2. The default for all other
logical trays is PHYSICAL TRAY 1.
DUPLEX Settings OFF/SHORTEDGE/LONGEDGE
If LONGEDGE is selected, the pages will be printed on both sides of the
paper for long-edge binding.
If SHORTEDGE is selected, the pages will be printed on both sides of the
paper for short-edge binding.
ORIENTAT
ION Settings PORTRAIT/LANDSCAPE
Specify the orientation of the media.
PAGE
RECOVER
Y
Settings ON/OFF
Select whether or not the page is printed again after recovering from a
paper misfeed.
If ON is selected, the page that was misfed is printed again.
If OFF is selected, printing continues with the next page without printing
the misfed page.
Paper Menu
Note All factory default values are shown in bold.