Omron Smart Process Control CJ-Series - Manual (Page 20)

22
Ordering Information
Basic Configuration Units
■ Connector Cables for Built-in I/O in CJ1M-CPU@2 CPU Unit
The connector for built-in I/O in the CJ1M-CPU21/22/23 is not included.
Purchase one of the connectors or connector cables in the following table separately.
Product name Specifications Model Stan-
dards
Applicable Connector MIL Flat Cable Connectors
(Pressure-fitted Connectors) XG4M-4030-T ---
Normal Connection Method for Built-in I/O
(When Connector-Terminal Block Conversion
Unit is Used)
Connec-
tor-
Termi-
nal
Block
Conver-
sion
Units Slim type (M3 screw terminals, 40-pin) XW2D-40G6 ---
Through type (M3 screw terminals, 40-pin) XW2B-40G4
Through type (M3.5 screw terminals, 40-pin) XW2B-40G5
Special Connecting Cables Cable length: 1 m XW2Z-100K
Cable length: 1.5 m XW2Z-150K
Cable length: 2 m XW2Z-200K
Cable length: 3 m XW2Z-300K
Cable length: 5 m XW2Z-500K
CJ1M-CPU2 @ (with Built-in I/O)
Built-in I/O Connector
XW2Z- @@@K
Special Connecting Cable
XW2 @-40G@
Connector-Terminal
Block Conversion Unit
Terminal Block