Onkyo TX-SR573 - Manual (Page 58)

58
Controlling Other Components—Continued
You can program the remote controller’s MACRO but-
tons to perform a sequence of actions.
Example:
To play a CD, you typically need to perform the follow-
ing actions:
1. Press the [RECEIVER] REMOTE MODE button
to select Receiver mode.
2. Press the [ON] button to turn on the AV receiver.
3. Press the [CD] INPUT SELECTOR button to
select the CD input source.
4. Press the REMOTE MODE [CD] button to select
the CD remote controller mode.
5. Press the Play [ ] button to start playback on the
CD player.
You can program a MACRO button to perform all five
actions.
Making Macros
You can make one macro for each MACRO button, and
each macro can perform up to eight actions.
Notes:
• If one or more of the buttons you used to make the
macro are taught new commands, the macro will no
longer work properly and will have to be made again.
Running Macros
Deleting Macros
Using Macros
10 - - / - - - 11 12
REMOTE MODE
HDD RECEIVER
TAPE/AMP
DVD CD
SAT TV VCR CABLE
MD CDR
+
-
TV CH
TV VOL
ENTER
SET
UP
RE
TURN
TO
P M ENU MEN
U
VOL
+
-
CH
DISPLAY
PREV
CH
DIMMER SLEEP
MUTING
INPUT SELECTOR
3 2
MACRO
1
+10 0 CLEAR
1 2 3
4 5 6
7 8 9
INPUT I
ON STANDBY
TV
CD
V1 V2 V3
MULTI CH DVD
TAPE TUNER
DISC
ALBUM
1
1, 3
Remote
indicator
1 While holding down the REMOTE
MODE button for the mode you
want to start with, press MACRO
button [1], [2], or [3].
The Remote indicator lights up.
For the CD example in the left column,
you’d press and hold the [RECEIVER]
REMOTE MODE button, and then
press MACRO button [1], [2], or [3].
2 On the remote controller, press
the buttons whose actions you
want to program into the macro
in the order you want them per-
formed.
For the CD example in the left column,
you’d press the following buttons:
[ON], INPUT SELECTOR [CD],
REMOTE MODE [CD], Play [
].
3 When you’ve finished, press the
MACRO button again.
The Remote indicator flashes twice.
If you enter all eight actions, the pro-
cess will finish automatically.
1 Press the MACRO [1], [2], or [3] button.
The actions in the macro are performed in the
order in which they were programmed. Keep the
remote controller pointed at the AV receiver until
all of the commands have been transmitted.
Macros can be run at anytime regardless of the
current remote controller mode.
1 While holding down the [RECEIVER]
REMOTE MODE button, press the MACRO
button whose macro you want to delete.
2 Press the MACRO button again.
REMOTE MODE
HDD
RECEIVER
TAPE/AMP
DVD
CD
SAT
TV VCR
CABLE
MD CDR