Oki C 5400n - Manual (Page 63)

Menu Functions • 61
CAUTION!
The Disk Maintenance Menu can be used to initialize the
printer's internal hard disk drive, to reassign the partition
contents, or to reformat the partitions.
Unless you know what you are doing, please avoid this
section of the Menu.
It is recommended that disk maintenance be done through
the Storage Device Manager software by the System
Administrator, or by someone who is knowledgeable in this
area.
Disk Maintenance Menu
This menu only appears if the optional Hard Disk Drive is
installed in your printer. See “Hard Disk Drive” on page 140.
Note: Factory default settings are shown in bold .
Item Settings Explanation
HDD INITIALIZE [EXECUTE] Partitions the hard disk and
formats each partition.
Appears only if hard disk drive
is installed.
PARTITION SIZE [EXECUTE] If you press ENTER to
execute this item, the PCL/
COMMON menu item
appears.
If you press MENU +, the
HDD FORMATION menu item
appears.
HDD FORMATING PCL
COMMON
PSE Formats the specified petition.
Careful! This deletes all the
items from the specified
partition.