Oki C 5400n - Manual (Page 55)

Menu Functions • 53
ZERO
CHARACTER
Normal
Slashed
Sets the zero to be slashed
or unslashed.
LINE PITCH 6 LPI
8 LPI
Specifies the line spacing
(lines per inch).
WHITE PAGE
SKIP
OFF
ON
Change this setting to ON if
you do not wish to print blank
pages.
Not available for duplex
printing.
CR FUNCTION CR
CR+LF
Sets functionality on receipt
of CR code.
LF FUNCTION LF
LF+CR
Sets functionality on receipt
of LF code.
LINE LENGTH 80 COLUMN
136 COLUMN
Specifies the number of
characters per line.
FORM LENGTH 11 INCH
11.7 INCH
12 INCH
Specifies the length of paper.
TOF POSITION 0.0 to 1.0 INCH, in 0.1-inch
increments
Specifies the distance of
print from the top edge of the
paper.
LEFT MARGIN 0.0 to 1.0 INCH, in 0.1-inch
increments Specifies the distance of
print from the left hand edge
of the paper.
FIT TO LETTER DISABLE
ENABLE
Fits print data, equivalent to
11 inches (66 lines), in the
LETTER-size printable area.
TEXT HEIGHT SAME
DIFF Sets the height of a
character. Change to DIFF if
you wish the character
height to vary with the
Character Pitch setting.
PPR Emulation Menu (continued)
Note: Factory default settings are shown in bold .
Item Settings Explanation