Oki C 5400n User Manual
Page 48
Menu Functions • 46
System Configuration Menu
Note:
Factory default settings are shown in
bold
.
Items
Settings
Explanation
POW SAVE
TIME
5
15
30
60
240
Adjusts the time before the printer
automatically switches into power saving
mode. In this mode power consumption is
reduced, but when a job is sent the printer
will require a warm-up time of up to 1
minute before printing can begin.
PERSONALITY AUTO
PCL
IBM PPR III XL
EPSON FX
PS3
EMULATION
This item selects which industry standard
emulation your printer uses. When set to
AUTO, incoming data is examined and
the correct emulation is automatically
selected each time a print job is received.
PARA PS-
PROTOCOL
ASCII
RAW
Sets the protocol to be used for Postscript
emulation print jobs through the parallel
interface.
USB PS-
PROTOCOL
RAW
ASCII
Sets the protocol to be used for Postscript
emulation print jobs through the USB
interface.
NET PS-
PROTOCOL
RAW
ASCII
Sets the protocol to be used for Postscript
emulation print jobs over the network.
CLEARABLE
WARNING
ON
JOB
When ON, non-critical warnings, such as
requests for a different paper size, can be
cleared by pressing the ON LINE button.
When set to JOB, they are only cleared
when the print job resumes.
AUTO
CONTINUE
ON
OFF
Determines whether or not the printer will
automatically recover from a memory
overflow condition.
MANUAL
TIMEOUT
OFF
30
60
Specifies how many seconds the printer
will wait for paper to be fed before
cancelling the job.