Olympus VT1621-01 - Manual (Page 34)

32
Setting the Shooting Mode and
Switching the Camera On
Switch the camera on.
1
If the lens cap is attached, remove
it.
Press the latches inward and pull the cap
off.
2
Turn the mode dial to align P
(Program mode) with the mark.
3
Move the power switch and make
sure the white line on the power
switch is at the ON position.
When the camera is switched on, the
battery check and number of storable
pictures are displayed in the control panel.
4
Set the focus mode switch to AF
(autofocus).
5
The first time that you use the
camera, you should set the date
and time. (
➞ 126)
Control panel difficult to see?
Press . The control panel backlight lights
for about 8 seconds.
LIGHT button
(Lights the control panel)
Control panel
Number of
storable
pictures Battery
check
3
4
AF
MF
2
ON
OFF
1