Omega Engineering OMEGASCOPE OS533 - Manual (Page 62)

Glossary of Key Strokes
8
8-1
Key(s) Key(s) Functions
• Selects one of the following Display
Modes:
E , MAX, MIN, dIF, AVG, TC, HAL, LAL,
AMB, PRN or MEM.
• Locks/unlocks the trigger.
• Enables/disables High Alarm.
• Enables/disables Target Ambient
Temperature Compensation.
• Enables/disables sending data to the
personal computer or serial printer.
• Stores temperature data on command.
• Displays previously stored data.
• Increments the data or value displayed.
• Turns on or off the backlighting (only in
MAX, MIN, dIF, TC or AVG Display
Modes).
• Decrements the data or value displayed.
• Changes the unit of measure from °F to
°C or vice versa (only in MAX, MIN, dIF,
TC or AVG Display Modes).
Press and hold down the
key & then press the • Allows you to go to the Diagnostic
Routine.
key
and keys • Allows you to erase all 100 stored
temperature data from the memory.