Omega Engineering OMEGASCOPE OS533 User Manual
Page 13
General Description
1
1-6
Figure 1-2. Display
and Keypad View
Table 1-2. Display Details
Key
Description
➀
Display Mode displays one of the following:
TC
(Thermocouple Input)
E
(Emissivity)
HAL
(High Alarm Setpoint)
MAX
(Maximum Temperature)
LAL
(Low Alarm Setpoint)
MIN
(Minimum Temperature)
AMB
(Ambient Target Temp)
dIF
(Differential Temperature)
PRN
(Print Data)
AVG
(Average Temperature)
MEM
(Store Temperature Data)
➁
Data associated with one of the Display Modes
➂
Backlighting Icon - allows the display to be viewed under low ambient light
➃
Displays the units of measure in either °F or °C
➄
Main display - displays the current temperature
➅
Locks the trigger / Enables or Disables alarms
➆
▲ for incrementing data;
is for turning on/off the backlighting
➇
▼ for decrementing data;
is for changing the units of measure from °F to °C or vice versa
➈
Function key for scrolling through the display modes
➉
Display Icons
Trigger Lock
Low Alarm
Ambient Target
Low Battery
High Alarm
Print Data
LAL, AMB, PRN:
OS533, OS534, OS523, OS524
TC:
OS532, OS533, OS534
MEM:
OS534, OS523, OS524
LCK
HAL
LOBAT
ATC
LAL
PRN
°F °C
1
10
9
8
7
6
5
4
3
2