Omega Engineering OMEGASCOPE OS533 - Manual (Page 59)

Specifications
7
7-2
Average Temperature
Accuracy Time Period
(under continuous operation): 11 1 ⁄
2
days
Emissivity: 0.10 to 1.00 in 0.01 increments,
set via keypad
Calculated Temperature Maximum (MAX), Minimum (MIN),
Values: Average (AVG), Differential (dIF),
Thermocouple (TC)
Ambient Target Set and enabled via keypad
Temperature Compensation: (OS533, OS534, OS523, OS524)
RS232 Output (for Standard on OS533, OS534, OS523, OS524
personal computers 4800 bits per second, 8 bits of data,
and serial printers): 1 stop bit, no parity
RS-232 Cable: RJ12 to 25 pin D connector, Female
RJ12 Pin #
25 pin D connector Pin #
3 3
5 7
4 & 5 jumpered
6 & 20 jumpered
Analog Cable: 6 feet long; 2-conductor, 22 AWG
3.5mm male plug
Alarm: Set and enabled via keypad
All models:
High alarm standard, with
audible and visual indication
OS533, OS534 Low alarm standard, with
OS523, OS524: audible and visual indication
Data Storage: OS534,OS523 Up to 100 sets of data
OS524: points on command. Each
set of data consists of the
temperature, the Emissivity
and the high alarm value.
Aiming Feature: ”V” groove on top of the thermometer or use Laser
Sighting
Analog Output: 1 mV/°F or 1 mV/°C, set via keypad
(0.5 mV/Deg, OS524)