Onkyo TX-DS989 - Manual (Page 48)

48
About
6. About menu
This menu consists of sub-menus that allow you to lock the
controls of the TX-DS989 and display its software version.
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
6.About
1.Lock Setup
2.Version
Quit:|OSD|
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
6.About
1.Lock Setup
2.Version
Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
6-1.Lock Setup
a.Lock :Locked
Quit:|OSD|
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
6.About
1.Lock Setup
2.Version
Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
6-2.Version
a.Master ID : xxxxxx
Quit:|OSD|
6-1. Lock Setup sub-menu
When ”Locked” is selected for this setting, it prevents all settings
in the OSD menu from being changed. This makes sure that the
time-consuming settings that have been set are not changed by
mistake. The default setting is ”Unlocked.”
6-2. Version
This displays the version number of the microcomputer currently
installed in your TX-DS989.
Zone2 OSD Setup
5. Zone2 OSD Setup menu
The settings for this menu are the same as those for the OSD Setup
sub-menu of the Preference menu. Refer to the OSD Setup sub-
menu for an explanation of the settings in this menu.
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
5.Zone2 OSD Setup
1.OSD Setup
Quit:|OSD|
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
5.Zone2 OSD Setup
1.OSD Setup
Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
5-1.OSD Setup
a.Background Color
:Blue1
b.Superimpose Mode
:Off
c.Immediate Display
:On
d.Display Position
:Top
e.Timeout :2sec
f.TV Format :Auto
Note:
The relationship between the OSD menu for the main zone and
remote zone (Zone 2)
The TX-DS989 cannot output the OSD menu for both the main
and remote zones simultaneously. For example, if an input source
with no image is selected at the main zone (only the background
color is displayed on the television screen) and the Zone 2 input
source is changed, then the display at the main zone changes from
the background color to a display with no image and the display at
Zone 2 changes to the OSD menu (Immediate Display). This is not
a malfunction. To prevent this, change the c. Immediate Display
setting for the 5-1. OSD Setup sub-menu to “OFF.”
The default setting for the c. Immediate Display setting of the 5-1.
OSD Setup sub-menu is “OFF.”