Speaker setup – Onkyo TX-DS989 User Manual

Page 30

Speaker Setup

1. Speaker Setup menu

After you have installed the TX-DS989, connected all the
components, and determined the speaker layout, it is now time to
perform the settings in the Speaker Setup menu for the optimum
sound acoustics for your environment and speaker layout.

Before you perform the following settings, it is important that you
first determine the following characteristics:

• The types and sizes of the speakers that are connected.

• The distance from each speaker to your normal listening

position.

1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About

1.Speaker Setup

1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
5.LFE Level Setup

Quit:|OSD|

1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About

1.Speaker Setup

1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
5.LFE Level

Quit:|OSD|

1-1.Speaker Config

a.Subwoofer :Yes
b.Front :Large
c.Center :Large
d.Surround L/R
:Large
e.Surround Back
:Large

Quit:|OSD|

1-1. Speaker Config sub-menu

Here you will enter which speakers are connected and the size of
each speaker.

a. Subwoofer

Yes: Select when a subwoofer is connected.

No: Select when a subwoofer is not connected.

b. Front

Large: Select if the front speakers are large sized.

Small: Select if the front speakers are small sized.

• If “No” is selected for the Subwoofer setting, then this setting

is fixed to “Large.”

c. Center

None: Select if no center speaker is connected.

Large: Select if the center speaker is large sized.

Small: Select if the center speaker is small sized.

• If “Small” is selected for the Front setting, then “Large”

cannot be selected for this setting.

d. Surround L/R

None: Select if no surround left and right speakers are connected.

Large: Select if the surround left and right speakers are large

sized.

Small: Select if the surround left and right speakers are small

sized.

• If “Small” is selected for the Front setting, then “Large”

cannot be selected for this setting.

e. Surround Back

None: Select if no surround back left and right speakers are

connected.

Large: Select if the surround back left and right speakers are large

sized.

Small: Select if the surround back left and right speakers are small

sized.

• If “None” is selected for the Surround L/R setting, then this

setting is fixed to “None.”

• If “Small” is selected for the Surround L/R setting, then

“Large” cannot be selected for this setting.

Memo:

Tip:

When setting the speaker size in the Speaker Config sub-menu,
use the guidelines given below.

Large: The complete frequency range for the channel you are
setting will be output from the speaker.

Small: Frequencies of the channel you are setting lower than 80
Hz will be output from the subwoofer.If the front speakers are set
to “Large,” then the sound may be output from both the left and
right speakers. (All THX speakers are small.)

SBL

SBR

Front

[ ]m/ft

[ ]

m/ft

[ ]m/ft

Front

Center

Monitor