Omron CS CJ1W-ETN21 - Manual (Page 66)

42
Remote Mail Command Details Section 3-4
3-4 Remote Mail Command Details
3-4-1 Format
Command Format
Response Format
MailLogClear Select when you want to execute the
Mail Log Clear command. Selected
Test Select when you want to execute the
Mail Test command. Selected
FinsSend Select when you want to execute the
FINS Command Send command. Not selected
Item Contents Default
To:
CC:
[email protected]
Subject: FileWrite
Para1: MEMC ARD ¥user
Para2: Overwrite =OK
#Overwrite OK
Write.iom(98KB)
Body:
Attached file:
Enter the Ethernet Unit's local mail address.
Enter the command name.
Enter the command's parameters, as follows.
Note: Enter standard US-ASCII characters only.
· Identify the parameter number at the beginning as ParaXX.
· Enter each parameter on a separate line.
· Enter any comments after the "#" character.
Attach a file when required.
To:
CC:
C ommand@omro n.com
Subject: R e:FileWrite
Respon se Cod e:00 00
Respon se Sta tus: Norma l e nd
>Pa ra1:MEMCARD ¥use r
>Pa ra2:Overwrite=OK
># Overwrit e OK
>-----(Attached File was deleted)----
Read.iom(98KB)
Body:
Attached file:
Returns response to the originating e-mail address.
The command name will be returned after "Re:".
Response information will be returned in the following order:
· The response code will be returned after "Response Code:".
· The response status will be returned after "Response Status:".
· The original e-mail's parameters are returned after ">" characters.
· The original e-mail's attached file will be deleted.
A file will be attached if the response requires an attached file.