Roland VK-8 - Manual (Page 49)

49
Advanced Use
Settings That Are Saved for
the Entire System
■ Rotary-related Settings
1.
Hold down the HARMONIC BAR PART [UPPER] and
[PEDAL] buttons and press the [TONE WHEEL]
button.
The indicators of the buttons [1]–[8] will blink.
2.
Press one of the buttons from [1] through [8] to select
the parameter that you want to edit.
There are 14 rotary-related parameters. You can select all
of these parameters by controlling the lighted/
extinguished state of the [PRESET] button’s indicator.
The following parameters are assigned to each button.
[PRESET] button’s indicator extinguished
[PRESET] button’s indicator lighted
3.
Turn the [VIBRATO AND CHORUS] knob to adjust
the setting.
If you press the VIBRATO AND CHORUS [ON] button,
the setting will return to the initial value.
4.
If you want to adjust the setting of another parameter,
press the appropriate button from [1] through [8] to
select the parameter, and turn the [VIBRATO AND
CHORUS] knob to adjust the setting.
When you want to stop editing, press the HARMONIC
BAR PART [UPPER] button.
5.
Press the [WRITE] button to finalize the settings of the
rotary-related parameters.
Parameter settings will be saved.
While the parameters are being saved, the indicators of
the [1]–[8] buttons will blink.
NOTE
Never turn off the power while parameters are being saved.
Button Parameter Page
[1] ROTARY WOOFER LEVEL p. 50
[2] ROTARY TWEETER LEVEL p. 50
[3] ROTARY WOOFER RISE TIME p. 50
[4] ROTARY TWEETER RISE TIME p. 50
[5] ROTARY WOOFER FALL TIME p. 50
[6] ROTARY TWEETER FALL TIME p. 50
[7] ROTARY WOOFER SPREAD p. 50
[8] ROTARY TWEETER SPREAD p. 50
Button Parameter Page
[1] ROTARY WOOFER SPEED SLOW p. 50
[2] ROTARY TWEETER SPEED SLOW p. 50
[3] ROTARY WOOFER SPEED FAST p. 50
[4] ROTARY TWEETER SPEED FAST p. 50
[5] ROTARY MIC DISTANCE p. 50
[6] ROTARY RANDOMIZE p. 50