Roland VK-8 - Manual (Page 46)

46
Saving Your Settings (Preset)
■ Saving to a Preset in the Same Bank
1
Make the panel settings that you want to save in the preset.
2
Hold down the [WRITE] button, and press one of the buttons from [1]
through [8] to specify the save-destination preset.
While the preset is being saved, the indicator of the selected preset number button
will blink. Once the preset has been saved, the indicator will change from blinking
to lit.
■ Saving to a Preset in Another Bank
1
Make the panel settings that you want to save in the preset.
2
Hold down the [WRITE] button, and press the [BANK] button and one of
the buttons from [1] through [8].
The save-destination bank will be selected.
3
Hold down the [WRITE] button and press one of the buttons from [1]
through [8] to specify the save-destination preset.
While the preset is being saved, the indicator of the selected preset number button
will blink. When the preset has been saved, the indicator will change from blinking
to lit.
■ Copying a preset
Selecting the copy-source preset
1
Press the [PRESET] button to make its indicator light.
2
Hold down the [BANK] button and press one of the buttons from [1]
through [8] to select the bank of the copy-source preset.
3
Press one of the buttons from [1] through [8] to select the number of the
copy-source preset.
The indicator of the number button you selected will light.
Selecting the copy-destination preset
4
Hold down the [WRITE] button and [BANK] button, and press one of the
buttons from [1] through [8] to specify the bank of the copy-destination
preset.
The indicator of the number button you selected will light.
5
Hold down the [WRITE] button and press one of the buttons from [1]
through [8] to select the copy-destination preset number.
While the preset is being saved, the indicator of the selected preset number will
blink. When the preset has been saved, the indicator will change from blinking to lit.
NOTE
Never turn off the power
while a preset is being
saved. Doing so may
damage the unit.
NOTE
Never turn off the power
while a preset is being
saved. Doing so may
damage the unit.
The indicator of the selected
bank will light while you hold
down the [BANK] button.
If you want to save the settings
in a preset of the same bank,
step 4 is not necessary.
NOTE
Never turn off the power
while a preset is being
saved. Doing so may
damage the unit.