Renesas HS2378KCI01H - Manual (Page 53)

29
Set options as follows:
Table 3.2 Setting the [Configuration] Dialog Box
Option Value
Mode H8S/xxxx (default)
Emulation mode Normal (normal execution, default)
Step option (Disables interrupt during single step
execution) Disables interrupts during single step
execution (default)
JTAG clock 4.125 MHz (default)
Operating Mode Operating mode determined by setting the
mode pin (default)
Flash memory synchronization Disable (default)
•
Click the [OK] button to set any changes in the configuration.