Renesas HS2378KCI01H - Manual (Page 155)

131
(3) Searching a Trace in the Bus Trace Function
The emulator supports two types of trace search function listed in table 6.10.
Table 6.10 Trace Search Function
Function Description
Trace Filter Displays all the information that matches the conditions specified by all the trace
data.
Trace Find Jumps to the information that matches the conditions specified by all the trace
data.
(i) Trace Filter Function
The emulator displays all the information that matches the specified conditions for all the trace
data. The search function is set in the [Trace Filter] dialog box.
Table 6.11 [Address] Group Box Options
Option Description
[Don’t care] check box Indicates that no address condition is set.
[Address] radio button Sets an address as a display condition.
[Range] radio button Sets an address range as a display condition.
[Start] edit box Sets the start value of the address range as a numeric or a
symbol.
[End] edit box Sets the end value of the address range as a numeric or a
symbol.
[Outside range] check box Sets outside the specified address range as a display condition.
Table 6.12 [Data] Group Box Options
Option Description
[Don’t care] check box Indicates that no data condition is set.
[Data] edit box Sets the data value as a numeric or a symbol.
[Byte] radio button Sets the byte access as a display condition.
[Word] radio button Sets the word access as a display condition.