beautypg.com

Renesas HS2378KCI01H User Manual

Page 37

background image

13

Notes:

1.

To connect the signals output from the connector, refer to the MCU pin
alignment.

2.

To remove the user system interface cable from the user system, pull the tab
on the connector upward.

3.

The range of communications that the emulator operates at is different
according to the MCUs used.

4.

Connect the signals from the connector as shown in section 6.2, Pin
Arrangement of the Hitachi-UDI Port Connector.

This manual is related to the following products: