Renesas HS2378KCI01H - Manual (Page 52)

28
3.4 Setting up the Emulator
The following MCU conditions must be set up on the emulator before downloading the program:
•
Device type
•
Execution mode
The following describes how to set up the emulator for the tutorial programs.
3.5 Setting the [Configuration] Dialog Box
•
Select [Configure Platform...] from the [Setup] menu to set configuration. The
[Configuration] dialog box is displayed.
Figure 3.3 [Configuration] Dialog Box
Note: The items that can be set in this window differ according to the product. For the
settings for each product, refer to the on-line help.