Renesas HS2378KCI01H User Manual
Page 128
104
Table 5.5 BREAKCONDITION_SET Command Parameters
Parameter
Type
Description
Numerical value,
character string
Numerical value or symbol representing an address
bus value
Keyword
Address bus access conditions
pcafter: The address bus is targeted during instruction
fetch cycles. Breaks after the instruction at the
address set by the
When
program fetch cycles, and the address bus during data
access cycles are targeted.
Keyword
Address bus mask conditions
Conditions are satisfied regardless of the values of
masked bits. Set a radix H' or B' and set * in the bit to
be masked.
Numerical value
Data bus value
Keyword
Sets the access conditions of the data bus. When
Specify either of the following:
lbyte: lower 8 bits
hbyte: upper 8 bits
word: word size
Keyword
Read/write conditions
Set either of the following keywords:
read: read cycles
write: write cycles
Note: The parameters for this command vary with the product. For the specifications of
each product, refer to the on-line help.