Renesas HS2378KCI01H - Manual (Page 25)

1
Section 1 Overview
The E10A emulator (hereafter referred to as the emulator) is a software and hardware
development support tool for application systems using the microprocessor developed by Hitachi,
Ltd.
The PCMCIA card emulator or PCI card emulator (hereafter referred to as the card emulator),
which is the main unit of the emulator, is connected, through the Hitachi-UDI (user debug
interface) port
* , to the user system. The user system can be debugged under the conditions similar
to the actual application conditions. The emulator enables debugging anywhere indoors or out.
The host computer for controlling the emulator must be an IBM PC compatible machine with a
PCMCIA type II or PCI slot.
Figures 1.1 and 1.2 show the system configuration using the emulator.
Note: The Hitachi-UDI is an interface compatible with the Joint Test Action Group
(JTAG) specifications.
PC
PC Card
User system interface cable
Host computer (PC with PCMCIA TYPE II slot)
PCMCIA card emulator
Insert into the PCMCIA TYPE II slot
H8S/xxxx
User system
Connect to the Hitachi-UDI port connector
Figure 1.1 System Configuration with the Emulator (PCMCIA Card Emulator Used)