Renesas HS2378KCI01H - Manual (Page 130)

106
5.2.5 BREAKPOINT: BP
Description:
Sets software breakpoints.
Note: The function will be different according to the MCUs used.
Format:
bp
Table 5.6 BREAKPOINT Command Parameter
Parameter Type Description
Numerical value,
character string Breakpoint value set by numerical value or symbol
When an odd address is set, the address is rounded down to
an even address.
Note: The parameters for this command vary with the product. For the specifications of
each product, refer to the on-line help.
Examples:
To set a software breakpoint at address H'12c8:
> bp H'12c8 (RET)