Ricoh Network Data Protection Unit Type C - Manual (Page 90)

Connecting the Printer
90
IEEE 1394 Connection
❒ Use the 1394 interface cable provided with the 1394 interface board.
❒ You cannot plug devices together to create loops.
❒ Do not use a cable more than 4.5 meters (14.8 feet) long.
A
Connect the interface cable to the 1394 interface board.
B
Connect the other end to the host computer.
❒ You can use either connector.
❒ Either of the two connectors for the 1394 interface unit can be used.
❒ If you have an interface cable with a ferrite core, connect the ferrite core
end to the printer.
For details about settings for IEEE 1394(IP over 1394, SCSI print) connec-
tion printing, see Software Guide.